叉装机
WSM971T28
叉装车产品简介：
2005年国内一台自主创新研发的叉装车在威盛公司诞生，改变了叉车、汽车吊、挖掘机、桅杆吊在石材矿山荒料低效率，高成本开采、装卸、搬运的囧况。科技未来，创新驱动发展， 2015年大吨位智能叉装车（可叉装物料52吨）在威盛公司研制成功，产品可配置远程智能诊断故障系统、智能终端系统、GPS定位，实时监测车况信息，实现了节能、快速有效、减排效果，获得了客户的！我公司叉装车现已形成系列化产品（3.8吨～52吨），是国内叉装车生产制造商，拥有核心自主知识产权（）2008年WSM951T16叉装车获得了“国家石材行业技术革新一等奖”、2012年获得了“福建省科学技术进步二等奖”、2012年被列入“科技计划项目”、2014年被列入“支撑计划项目”等诸多奖项。无规矩不成方圆，为规范叉装车行业合理健康发展，我公司主笔起草了《JB/T11296-2012石材矿山叉装车》行业标准，推动了叉装车行业质与量的发展。
In 2005, the first fork wheel loader independently innovated in China by WSM, which changed the situation of low efficiency and high cost mining, loading, unloading and handling of forklifts, truck cranes, excavators and masts hanging in stone mines.Leading the future science and technology, innovation-driven development, in 2015, the world's largest tonnage intelligent fork wheel loader (maximum fork material 52 tons) by WSM successfully developed, the product can configure the remote fault intelligent diagnosis system, intelligent terminal system, GPS positioning, real-time monitoring information in perfect condition, realize the energy saving, high efficiency, emissions reduction effect, won the customer consistent high praise!My fork wheel loader has formed series products of the company (3.8 tons ~ 52 tons), is the most complete domestic products, the biggest manufacturer of fork truck loading production in tonnage, 37 items with core independent intellectual property rights (patents), which reached the international advanced level 3, the domestic leading level 11, WSM951T16 fork truck loading in 2008 won the "national stone industry technology innovation award", in 2012 won the "Fujian province scientific and technological progress second prize", in 2012 is listed as "national science and technology plan projects", in 2014 was listed in "national support plan project", and many other awards. In order to standardize the reasonable and healthy development of fork-loading industry, our company has drafted the industry standard JB/ t11296-2012 fork-loading in stone mine, which has promoted the development of fork-loading industry in quality and quantity, and is the leader and ancestor of fork-loading industry in China.
性能参数
Performance parameter
| 序号 | 项目名称 | 单位 | WSM971T28 | |
| 1 | 整机外形尺寸 | 长(货叉平放地面/行驶状态) | mm | 9070 |
| 2 | 宽 Width | mm | 3200 | |
| 3 | 高 Height | mm | 3750 | |
| 4 | 整机参数 Machine parameter | 整机操作重量： Operating weight | Kg | 31500 |
| 5 | 牵引力 Max. Traction | KN | 230 | |
| 6 | 燃油箱容量 Fuel tank capacity | L | 300 | |
| 7 | 液压油箱容量 | L | 300 | |
| 8 | 轴距 Wheel base | mm | 4000 | |
| 9 | 轮距 Wheel tread | mm | 2825 | |
| 10 | 最小转弯半径 Min.turning radius | mm | 8000 | |
| 11 | 爬坡能力(空载/满载) | % | 36/25 | |
| 12 | 最小离地间隙 Min. Ground clearance | mm | 490 | |
| 13 | 工参数作装置几何 Working device geometric parameters | 举升货叉面高度 Max. height of lifting fork | mm | 3600 |
| 14 | 标准货叉尺寸(长*宽*高) Standard fork size(L*W*H) | mm | 1500*250*150 | |
| 15 | 作业能力 | 载荷中心距 Load center distance | mm | 900 |
| 16 | 额定起重量 Rated load lifting capacity (the entier) | Kg | 28000 | |
| 17 | 起重量 Max. 1ift capacity | Kg | 28000（2000mm） | |
| 18 | 发动机 | 型号 Model |
| D10.24T30 |
| 19 | 额定功率/转速 Rated power/rated speed | Kw/rpm | 175/2200 | |
| 备注：随技术改进，产品结构、参数将不断改进，样品信息与实物略有不符的以实物为准 | ||||
产品特点：
Products advantages:
1.先导操纵
Pilot control
采用比例先导控制液压系统，控制精准，简化了操作程序，减轻了劳动强度，调速性能好，调速范围宽。
Adopt proportional pilot control hydraulic system, accurate control, simplify operation procedure, reduce labor intensity, speed regulation performance (good performance of speed control), speed range wide.
2.的牵引力
Super traction
双涡轮液力变矩器与高品质的涡轮增压发动机较佳匹配，优化匹配箱、桥减速比，使整机具有的牵引力。
The Double-turbine hydraulic torque converter is best matched with the high quality turbocharged engine, the best matching box and bridge deceleration ratio, which makes the whole machine have super traction.
3.优越的叉铲装性能
Good performance
优越的叉铲装性能，换上铲斗可当装载机使用，配置大缸径的举升缸，地面举升力达到34吨。
The superior wheel forklift loader performance , can be used as wheel loader, the lifting cylinder with big diameter cylinder,the lifting force on the ground reached 34 tons.
4.可靠的结构件
Strong structure
前后车架采用箱型结构，运用有限元分析方法设计板材厚、焊缝牢、强度高，车架上下铰接间距大，抗扭曲能力强、抗冲击韧性好，适应任何恶劣作业工况。The front and rear frame adopt box structure, using the finite element analysis method of super design, thickness material , strong welding seam,high intensity, the spacing of up and down frame is large, the distortion resistance is strong, good impact toughness, it fit any adverse operating conditions.
5.驾驶室
Cab
新型钢结构驾驶室内饰豪华，前吹风，空间大，视野宽，空调和暖风机外置（选配），可调式豪华座椅，调节方便，乘坐舒适。
New steel structure cabluxurious interior decoration ,(front blow air, large space, wide field of vision, air conditioning and heater outside(optional), adjustable luxury seat, easy to adjust, ride comfortable.
6.发动机
Engine
杭发斯太尔发动机，动力强劲，扭矩储备大，低油耗，低噪音，性能可靠，标配双级空气过滤器，适合粉尘较多的作业场所。优化设计的减震器，有效地吸收了振动、降低了噪音。
China Steyr engine, the power is strong, the torque reserve is large, low oil consumption, low noise, the performance is reliable,standard with double stage air filter.It suitable for the work place which has more dust.The optimization design of the shock absorber,absorbs the vibration effectively and reduce the noise.
标准装备：
Standard configuration
1.发动机：中国重汽杭发国二/三发动机
Engine: The China Steyr Tier2/3
2.变速箱： ZL70
Transmission:ZL70
3.操纵形式：先导操纵
Control form: pilot control
4.驱动桥：自制加强型驱动桥
Drive axle: WSM heavy duty drive axle
5.散热系统：加大型水箱、加大机油冷却器
Cooling system: large water tank, large oil cooling radiator
6.制动系统：气顶油制动系统
The braking system： Gas cap oil caliper disc brake
7.属具：货叉
Attachment: fork
可选部件
Optional part
1.轮胎保护链
Tire protection chain
2.快换斗或简易叉斗
Quick exchanged or easy-exchange bucket
3.冷暖空调
Warm and cool air conditioner
4.康明斯发动机
Cummins engine
5.车载终端系统（附带GPS定位，实时监测车况信息）
Vehicle’s terminal system (including GPS positioning, real time monitoring, machine information)
6.远程故障智能诊断系统
Distance fault diagnostic system
