TD系列垂直提升机产品概述
TD系列垂直提升机适用于垂直输送堆积密度不大于1.5t/m3的粉状、粒状、及小块状的磨琢性较小的散状物料，如粮食、煤、水泥、碎矿石等，提升高度40m。TD系列斗式提升机严格按照JB3926-85《垂直斗式提升机》标准设计制造，目前国内常用的斗式提升机均为垂直式。TD系列垂直提升机特点为：结构简单，运行平稳，挖取式装料，离心重力式卸料，物料温度不超过60℃；TD系列斗式提升机与传统D型斗式提升机相比输送效率高、料斗形式多，应优先选用。本机备有四种料斗：Q型（浅斗）、H型（弧底斗）、zh型（中深斗）、sh型（深斗），分别输送各种物料，用户可以根据物料特性来选择适当的料斗。本提升机代号为TD,即带式斗式提升机；产品规格以斗宽表示。
Product overview
TD series bucket elevator is suitable for the vertical transport of bulk density is not greater than 1.5 t/m3 powder, granulated and small lump of grinding cut less material, such as grain, coal, cement, crushed ore, hoisting height to 40 m.TD series bucket elevator in strict accordance with the JB3926-85 standard design and manufacture of vertical bucket elevator, the current domestic common bucket elevator are vertical.TD series bucket elevator features: simple structure, smooth operation, harvest type charging, centrifugal gravity discharge, the material temperature less than 60 ℃;TD series bucket elevator compared with the traditional D type bucket elevator, hopper, high transmission efficiency should be preferable.This machine is equipped with four hopper: Q type (light pipe), H (arc bottom bucket), zh (in a deep bucket), sh (deep), conveying a variety of materials, respectively, a user can choose according to material features of appropriate hopper.This elevator codes for TD, the belt bucket elevator;Product specifications to dou wide said.
TD系列垂直提升机主要特点
1.提升范围广,这类提升机对物料的种类、特性要求少,不但能提升一般粉状、小颗粒状物料,而且可提升磨琢性较大的物料.密封性好,环境污染少。
2. 驱动功率小,采用流入式喂料、诱导式卸料、大容量的料斗密集型布置.在物料提升时几乎无回料和挖料现象,因此无效功率少。
3.使用寿命长,提升机的喂料采取流入式,无需用斗挖料,材料之间很少发生挤压和碰撞现象。本机在设计时保证物料在喂料、卸料时少有撒落,减少了机械磨损。
4. 运行可靠性好,先进的设计原理和加工方法,保证了整机运行的可靠性,时间超过2万小时。提升高度高.提升机运行平稳,因此可达到较高的提升高度。
Features
1. Ascension is wide, this kind of elevator less kinds, characteristics of the material requirements, not only can improve the general powder, small granular materials, and can improve grinding cut larger material. Good sealing, less environmental pollution.
2. Driving power is small, use of feeding, induction of inflow discharge, large capacity of hopper intensive layout. In material ascends almost no back and dig material phenomenon, therefore less reactive power.
3. The service life is long, hoist feed take into the type, without using bucket digging of material, the material between the extrusion and collision occur rarely.The machine when the design to ensure material few scattered when feeding, discharging, reduce the mechanical wear and tear.
4. Good reliability, advanced design principle and processing method, ensure the reliability of the machine running, trouble-free time more than 20000 hours.High hoisting height. Hoist running smoothly, thus can achieve high hoisting height.
TD型垂直提升机安装尺寸
Installation dimensions
TD系列垂直提升机技术参数表
Parameters
| 型号 | TD160 | TD250 | TD315 | TD400 | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 料斗形式 | Q | h | zD | Sd | Q | h | zD | Sd | Q | h | zD | Sd | Q | h | zD | Sd |
| 输送量(m3/h) | 5.4 | 9.6 | 9.6 | 16 | 12 | 22 | 23 | 35 | 17 | 30 | 25 | 40 | 24 | 46 | 41 | 66 |
| 斗宽(mm) | 160 | 250 | 315 | 400 | ||||||||||||
| 斗容(L) | 0.5 | 0.9 | 4.2 | 1.9 | 1.3 | 2.2 | 3.0 | 4.6 | 2 | 3.6 | 3.8 | 5.8 | 3.1 | 5.6 | 5.9 | 9.4 |
| 斗距(mm) | 280 | 350 | 360 | 450 | 400 | 500 | 480 | 560 | ||||||||
| 带宽(mm) | 200 | 300 | 400 | 500 | ||||||||||||
| 斗速(m/s) | 1.4 | 1.6 | 1.6 | 1.8 | ||||||||||||
| 物料量大块(mm) | 25 | 35 | 45 | 55 | ||||||||||||
| 型号 | TD500 | TD630 | TD160 | TD250 | TD350 | TD450 | ||||||||||
| 料斗形式 | Q | h | zD | Sd | h | zD | Sd | Q | S | Q | S | Q | S | Q | S | |
| 输送量(m3/h) | 38 | 70 | 58 | 92 | 85 | 89 | 142 | 4.7 | 8 | 18 | 22 | 25 | 42 | 50 | 72 | |
| 斗宽(mm) | 500 | 630 | 160 | 250 | 350 | 450 | ||||||||||
| 斗容(L) | 4.8 | 9 | 9.3 | 15 | 14 | 14.6 | 23.5 | 0.65 | 1.1 | 2.6 | 3.2 | 7 | 7.8 | 14.5 | 15 | |
| 斗距(mm) | 500 | 625 | 710 | 300 | 400 | 500 | 640 | |||||||||
| 带宽(mm) | 600 | 700 | 200 | 300 | 400 | 500 | ||||||||||
| 斗速(m/s) | 1.8 | 2 | 1 | 1.25 | 1.25 | 1.25 | ||||||||||
| 物料量大块(mm) | 60 | 70 | 25 | 35 | 45 | 55 | ||||||||||
说明：1.表中斗容为计算斗容，输送量按填充系数0.6计算得出。
2.斗提机料斗用途为:浅料斗：输送潮湿、易结块、难抛出的物料。如湿沙、湿煤等。
深料斗：输送干燥的、松散的、易抛出的物料。如水泥、煤块、碎石、石英砂等。
